Surveyor Needed

Discussion in 'Development' started by Bravi, 29th May, 2017.

Join Australia's most dynamic and respected property investment community
Tags:
  1. Bravi

    Bravi New Member

    Joined:
    29th May, 2017
    Posts:
    1
    Location:
    Sydney
    Could anyone recommend a surveyor to work with a 2 lot strata sub division with Blacktown council? The lot is a vacant block.
     
    Bravi, 29th May, 2017
    #1
  2. Scott No Mates

    Scott No Mates Well-Known Member

    Joined:
    18th Jun, 2015
    Posts:
    27,224
    Location:
    Sydney or NSW or Australia
    @bmc Might be able to point you to a local.
     
    Scott No Mates, 29th May, 2017
    #2
    Gingin likes this.
  3. Andrewtfarr

    Andrewtfarr Active Member

    Joined:
    3rd Nov, 2015
    Posts:
    33
    Location:
    Sydney, NSW
    Try Land Surveys in Artarmon
     
    Andrewtfarr, 30th May, 2017
    #3
  4. Gingin

    Gingin Well-Known Member

    Joined:
    20th Jun, 2015
    Posts:
    137
    Location:
    Sydney
    @bmc is a champion. Engage him.u won't have any issues
     
    Gingin, 30th May, 2017
    #4
  5. bmc

    bmc Well-Known Member

    Joined:
    18th Oct, 2015
    Posts:
    1,123
    Location:
    Sydney
    @Bravi
    there are many established firms in this area. (or closer than me)
    maybe try
    Craig & Rhodes
    or Vince Morgan

    i recommend to have the surveyor define the property boundary at the same time of the level & detail plan. this may avoid delays in design clearances (if any) further down the track.
    You may need a survey plan of redefinition if the base deposited plan is over a certain age. this will need to be lodged with LPI prior to, or in conjunction with, the Strata Plan lodgement. The surveyor will advise on this and quote accordingly.
    The surveyor should review your DA conditions and advise you on any easements required (ie a positive covenant for the drainage system)
    you will also need to apply for a Section73 certificate. you surveyor can also organise this.

    good luck with your project
     
    bmc, 1st Jun, 2017
    #5