small frontage subdivision

Discussion in 'Development' started by igor1234, 4th May, 2020.

Join Australia's most dynamic and respected property investment community
Tags:
  1. igor1234

    igor1234 Active Member

    Joined:
    26th Sep, 2016
    Posts:
    42
    Location:
    sydney
    Hello,

    newbie question here: i am looking at a property in Elizabeth (adelaide area) with frontage of ~ 18 meters. the council regulations for subdivision is 10 meter frontage. does anyone know if these are hard rules or application dependent? total area after subdivision still much larger than their 300 sqm minimum. from google maps i can def see smaller blocks and on REA also can find sub 300 sqm blocks.

    thanks!
     
  2. Scott No Mates

    Scott No Mates Well-Known Member

    Joined:
    18th Jun, 2015
    Posts:
    20,328
    Location:
    Sydney or NSW or Australia
    Is your frontage angled or 90 degrees? Concessions are often granted if the front of the block is angled (making the frontage longer) even if your width is less then the requirement.

    A town planner or surveyor would be able to advise If this is feasible.
     
    Archaon likes this.