Screen Door doesn't get closed fully

Discussion in 'Renovation & Home Improvement' started by NWHunter, 1st Jan, 2019.

Join Australia's most dynamic and respected property investment community
Tags:
  1. NWHunter

    NWHunter Well-Known Member

    Joined:
    29th Apr, 2017
    Posts:
    50
    Location:
    Sydney
    What could be the problem here? and how to fix it?
    Please check :


    TIA
     

    Attached Files:

    NWHunter, 1st Jan, 2019
    #1
  2. Noobieboy

    Noobieboy Well-Known Member

    Joined:
    10th Aug, 2017
    Posts:
    2,172
    Location:
    Utopia
    Did the building shift? Are there any cracks on the corners of doors/ windows?
     
    Noobieboy, 1st Jan, 2019
    #2
  3. Marg4000

    Marg4000 Well-Known Member

    Joined:
    18th Jun, 2015
    Posts:
    6,421
    Location:
    Qld
    Is the auto closer malfunctioning, stopping the door from fully closing?
    Marg
     
    Marg4000, 1st Jan, 2019
    #3
  4. Scott No Mates

    Scott No Mates Well-Known Member

    Joined:
    18th Jun, 2015
    Posts:
    27,248
    Location:
    Sydney or NSW or Australia
    Check the top of the closer arm, it may have the 'hold open' sitting in the wrong spot.

    [​IMG]
     
    Last edited: 1st Jan, 2019
    Scott No Mates, 1st Jan, 2019
    #4
  5. The Y-man

    The Y-man Moderator Staff Member

    Joined:
    18th Jun, 2015
    Posts:
    13,525
    Location:
    Melbourne
    Maybe the house was built by Icon.... :eek:

    The Y-man
     
    The Y-man, 1st Jan, 2019
    #5
    Noobieboy likes this.
  6. robboat

    robboat Well-Known Member

    Joined:
    20th Jun, 2015
    Posts:
    177
    Location:
    Sunny Queensland
    Door seems to fit ok in the video....
    Disconnect the closer and check if it closes easily...if so it's a problem with the closer unit (dry, bent, sticking, broken spring, etc)
    If it's still not closing easily check the hinges....they are usually a "wrap around" type hinge and wear in the pins or loose hinge mounts can cause the door to stay slightly ajar....
    Good luck.
     
    robboat, 1st Jan, 2019
    #6
  7. NWHunter

    NWHunter Well-Known Member

    Joined:
    29th Apr, 2017
    Posts:
    50
    Location:
    Sydney
    NWHunter, 2nd Jan, 2019
    #7
  8. Tools

    Tools Well-Known Member

    Joined:
    18th Jun, 2015
    Posts:
    305
    Location:
    In the lounge
    links don't work for me

    Tools
     
    Tools, 2nd Jan, 2019
    #8
  9. Propertunity

    Propertunity Well-Known Member

    Joined:
    19th Jun, 2015
    Posts:
    3,476
    Location:
    NSW
    Oh you crack me up. Too soon?
     
    Propertunity, 2nd Jan, 2019
    #9