Custom made roof vent quote

Discussion in 'Repairs & Maintenance' started by WattleIdo, 21st May, 2017.

Join Australia's most dynamic and respected property investment community
  1. WattleIdo

    WattleIdo midas touch

    Joined:
    18th Jun, 2015
    Posts:
    3,429
    Location:
    Riverina NSW
    Roof vent has rotted and possums took up residence. They have now been relocated and next issue is to deal with the vent itself. Have asked for a quote on a colorbond attachment and it has come back at $850 :eek: .
    To me, it seems ridiculous but seeking knowledgable opinions from the handy types, please. :)

    IMG_1690.JPG
     
    Marg4000 likes this.
  2. WestOz

    WestOz Well-Known Member

    Joined:
    19th Jun, 2015
    Posts:
    1,259
    Location:
    WestOz
    Maybe panel it and insert an off the shelf vent.
    Or angle slat it, add/ fit fly screen to the inside of frame
     
    WattleIdo likes this.
  3. Scott No Mates

    Scott No Mates Well-Known Member

    Joined:
    18th Jun, 2015
    Posts:
    27,095
    Location:
    Sydney or NSW or Australia
    Have a chat with an air-grille fabricator (eg. Air Grilles) and get a local to install.

    Half of the cost will be in accessing the gable safely - power line is next to the grille and will require scaffolding.
     
    WattleIdo likes this.
  4. 158

    158 Well-Known Member

    Joined:
    18th Jun, 2015
    Posts:
    1,275
    Location:
    Brisbane, Qld
    Cut to size perforated sheet and 8 screws should do the trick.

    pinkboy
     
    dabbler, WattleIdo and jim1964 like this.
  5. Joynz

    Joynz Well-Known Member

    Joined:
    5th Apr, 2016
    Posts:
    5,751
    Location:
    Melbourne
    Just needs a 'tiger tail' (black and yellow striped protective sleeve) round the power line for safety. I got one installed temporarily (free in Vic) by my power wholesaler.

    A ladder will be fine at that height. Alternatively, access from inside the roof space.
     
    WattleIdo likes this.
  6. WattleIdo

    WattleIdo midas touch

    Joined:
    18th Jun, 2015
    Posts:
    3,429
    Location:
    Riverina NSW
    Thanks guys, will look into all these suggestions.
     
  7. Scott No Mates

    Scott No Mates Well-Known Member

    Joined:
    18th Jun, 2015
    Posts:
    27,095
    Location:
    Sydney or NSW or Australia
    IIRC painters are about the only trade permitted to work off ladders.
     
  8. dabbler

    dabbler Well-Known Member

    Joined:
    18th Jun, 2015
    Posts:
    8,572
    Location:
    Sid en e - olympic city
    Yeah, if that frame is timber, I would just buy mesh or wire and screw it on from either outside or inside or both.

    The gauze they use for security doors would work too and you can spray it to match.
     
    WattleIdo likes this.

Buy Property Interstate WITHOUT Dropping $15k On Buyers Agents Each Time! Helping People Achieve PASSIVE INCOME Using Our Unique Data-Driven System, So You Can Confidently Buy Top 5% Growth & Cashflow Property, Anywhere In Australia