Corner Lot - Corner Setback?

Discussion in 'Development' started by The_Billy, 10th Oct, 2020.

Join Australia's most dynamic and respected property investment community
  1. The_Billy

    The_Billy Well-Known Member

    Joined:
    19th Mar, 2018
    Posts:
    154
    Location:
    Sydney
    Hi All

    Just wondering if I can get some advice. In part 3 of the NSW housing code for exempt and complying development - for a corner block I am working on that is 345m2 in size. It sates that the front setback to primary road is 4.5m and the side setback to secondary road is 2m. However it is not clear on what the setback is for the diagonal section of boundary between the primary and secondary road. I have attached a paint diagram for reference. Is that also to be 2m or is there is different rule applicable in the code?

    Thanks in advance
     

    Attached Files:

    The_Billy, 10th Oct, 2020
    #1
  2. leostarkz

    leostarkz Well-Known Member

    Joined:
    27th Jan, 2021
    Posts:
    64
    Location:
    Sydney
    did you figure this out mate?
     
    leostarkz, 16th Oct, 2021
    #2
  3. Redom

    Redom Mortgage Broker Business Plus Member

    Joined:
    18th Jun, 2015
    Posts:
    4,658
    Location:
    Sydney (Australia Wide)
    We've done a few under the LHRS code in NSW for terraces. Have used the front setback there. I.e. 4.5m in your case, reducing access to the splay area (not the secondary road setback of ~2m).
     
    Redom, 18th Oct, 2021
    #3